Tutorial
Upload Data from Hub
1. Connect the Hub with the provided USB cable to your computer.
2. Also plug the power supply to the Hub.
3. Open Analyze and login
4. Select “Upload New Data” on the top right of the screen.
5. Select the Sensor V2 (follow the arrow)
6. Select the related team.
Important: The Web-USB sync mechanism is only supported by Google Chrome. You can download Google Chrome for free here.
7. Click on “Connect Device”
8. A pop-up open showing the connected sensors. Select the first sensor.
9. Once connected, click on “Upload”
Warning: when the upload is done, the data is erased from your device. You can find them in the “Uploads” screen.
10. Now click on Upload another to Upload data from the next device
11. Then go back to point 8 and select the next device
Note: you will have to repeat steps 8 to 11 for each device plugged into the Hub
12. The Uploaded Files are listed on the right side.
13. Once you have uploaded the data for each device, click on “Next”
14. Once successfully uploaded, you can start with the Session Selection.